Specifications

Wrap Sleeve Anchor (of various designs) for push through installation.
The tapered part of the fasteners is inserted in the wall and when the hexagonal nut or bolt is tightened the tapered bolt or nut is pulled into the sleeve, it expands & takes grip in the concrete.

Specifications

Sleeve and Taper Nut with internal threaded taper nuts for the lowest anchorage depth.
When the nut on the stud is tightened, the tapered nut on the other end is pulled into the sleeve which on expanding takes the grip in the wall.

Specifications

Sleeve Anchor for push through installation.
For these anchor cylindrical conical hole is made with an uncut drill bit.
The Sleeve is driven or pushed over the cone shaped bolt with a setting tool which takes the grip in the concrete

Specifications

3 Piece Anchors – also known as Rowel Bolts
Cone side is inserted in the drilled hole & when the hexagonal bolt or nut is tightened the three strips held with spring slips on the tapered nut or projection bolts & takes the grip in the concrete.
Installing heavy equipment and machinery
Fixing barriers, roller shutter and fire doors and switchgear
Securing structural fixtures.
For use in concrete and most types of masonry.
Ideal for overhead and ceiling work or heavy items.
Securing cable trays, ducting and trunking.
Installing partitions and structural fixtures.

Specifications

Double Ring through bolt for push-through and pre-positioned installation.
When the hexagon nut is tightened, the tapered bolt is pulled into the expansion clip and expands it against the hole wall.
Drill hole to the length of fasteners minus the thickness of the nuts minus the thickness of the fixture.
Pump out the dust.
Place the fastners & then hammer it.
Tighten the nut which projects out & the clip inside expands and takes the firm grip on the concrete
The double clips gives double Gripping.

Specifications

Drop-in-Anchor
Bullet type anchor shell with internal thread for pre-positioned installation.
When the bullet is placed in shell & hit with a setting tools it slides forward & the inside part of shell expands and takes the grip in the wall.

Specifications

Through Bolt for push through installation.
The fasteners is hammered into the drilled hole upto the anchors length (minus the height of nut.)
When the nut is tightened, the tappered bolt is pulled into the safety wedge clip and expands it. The safety wedge clip is very reliable for anchoring and expands & takes grip in the wall.

Specifications

Through Bolt for push through installation.
The fasteners is hammered into the drilled hole upto the anchors length (minus the height of nut.)
When the nut is tightened, the tappered bolt is pulled into the safety wedge clip and expands it. The safety wedge clip is very reliable for anchoring and expands & takes grip in the wall.

Specifications

Hammer driven pin type anchor for push-through installation.
The shell of an anchor is driven into the hole without the expansion pin.
Then the expansion pin is driven into the shell which after being hit expands the shell against the concrete.
Suitable for Concrete C12/15

Specifications

Standard : DIN / IS / AISI
Size : Metric- M8 to M36, BSW – 5/16 to 1.1/4″
Grade : SS304 | SS316 | SS202

Tell us what you are looking for?

Have questions or need a quotation?