Sleeve Anchor Bolt
WhatsApp us the size, grade, finish and quantity. We reply within one working day (Mon to Sat, 10 am to 8 pm).
WhatsApp us Get a Quote +91 90333 11425 Download catalogue (PDF)JMIKS Fasteners supplies sleeve anchor bolts in mild steel and stainless steel. A sleeve anchor expands along its length, so it can be used in concrete, brick and stone.
Sleeve anchor for push-through installation.
Drill through the fixture into the base material and clean out the dust.
Insert the anchor and tighten the nut: the cone at the end of the bolt is pulled into the sleeve.
The sleeve expands and grips the wall of the hole.
Yes. The long sleeve spreads the pressure, so sleeve anchors suit solid brick and stone as well as concrete. For heavy loads in concrete, a wedge anchor is stronger.
You drill through the fixture and into the base material in one step, then push the anchor through the fixture into the hole. The holes always line up, and there is no need to mark and drill them separately.
It can if it is fixed too close to an edge, a corner or another anchor, or if it is over-tightened, because the sleeve presses outwards on the wall of the hole. In brick and stone, keep well away from edges and tighten only until the anchor is firm.
Size chart
The size chart for this anchor is not available online right now. Please contact us with the anchor type, diameter, length and quantity, and we will tell you the sizes we can supply.
Send the size, grade, finish and quantity on WhatsApp. We reply with the rate and stock position within one working day.
