Name: JMIKS Fasteners
Address: 159-Vishala Platinum Ind. Estate, Nr. Vishala Gold Ind. Estate, S.P. Ring Road, Nava Odhav, Ahmedabad, Gujarat, 382415, IN
Telephone: +91 90333 11425

JMIKS Fasteners supplies stainless steel and high tensile bolts and machine screws from Ahmedabad: hex bolts, Allen cap and CSK screws, button head screws, Phillips and slotted screws, flange bolts and grub screws. Stainless grades are SS 304, SS 316 and SS 202, and high tensile grades run from 4.6 to 12.9. Sizes cover M3 to M36 and ¼" to 1-1/4" BSW, to DIN and IS standards. Choose a product below or send us your requirement.

Hex Bolt

Allen Cap Screw

Allen CSK Screw

Countersunk Slotted Screw

Button Head Screw

CSK Phillips Screw

Pan Phillips Screw

Flange Bolt

Grub Screw

Bolts and Machine Screws at a Glance

Product	Head and drive	Common standards	Grades
Hex Bolt	Hexagon head, spanner	DIN 931 / 933, ISO 4014 / 4017, IS 1364	SS 304, 316, 202; 4.6 to 12.9
Allen Cap Screw	Round head, hex socket	DIN 912, ISO 4762	SS 304, 316, 202; 4.6 to 12.9
Allen CSK Screw	Countersunk head, hex socket	DIN 7991, ISO 10642	SS 304, 316, 202; 4.6 to 12.9
Button Head Screw	Low dome head, hex socket	ISO 7380	SS 304, 316, 202; 4.6 to 12.9
CSK Phillips Screw	Countersunk head, cross recess	DIN 965, ISO 7046	SS 304, 316, 202
Pan Phillips Screw	Pan head, cross recess	DIN 7985, ISO 7045	SS 304, 316, 202
Countersunk Slotted Screw	Countersunk head, slot	DIN 963, ISO 2009	SS 304, 316, 202
Flange Bolt	Hexagon head with flange	DIN 6921	SS 304, 316, 202
Grub Screw	Headless, hex socket	DIN 913 to 916	4.6 to 12.9

Sizes: M3 to M36 and ¼" to 1-1/4" BSW. Lengths: 6 mm to 250 mm.

Stainless Steel or High Tensile?

Stainless steel bolts (SS 304, SS 316, SS 202) resist rust and need no coating, so they suit food, pharma, water, chemical and outdoor work. High tensile bolts (8.8, 10.9, 12.9) are hardened steel with two to three times the strength of mild steel, for machinery and structural joints. Mild steel 4.6 suits light, general work.

Where Bolts and Machine Screws Are Used

Construction, steel structures and pre-engineered buildings
Solar panel mounting structures
Machinery, pumps and motors
Electrical panels and switchgear
Food, dairy and pharma equipment
Automobile and engineering components

Why Buy from JMIKS Fasteners

One supplier for stainless steel, mild steel and high tensile fasteners
Matching bolts, nuts, washers and studs, so a full set can be ordered together
Metric and BSW sizes, made to DIN, IS and ASTM standards
Focus on quality material and on-time delivery
Located on S.P. Ring Road, Nava Odhav, Ahmedabad

Bolts and Machine Screws FAQs

What is the difference between a bolt and a machine screw?

A bolt is usually tightened with a nut and often has a plain shank under the head. A machine screw is threaded right up to the head and is often screwed into a tapped hole. In daily use the two names overlap.

Which stainless steel grade is best for bolts?

SS 304 is the standard choice. SS 316 is better near the sea and around chemicals, and SS 202 is an economical option for indoor, dry use.

Can I order matching nuts and washers?

Yes. See our nuts and washers to order complete sets.

How can I get a price?

Send the product name, size, length, grade, finish and quantity through our enquiry form, or call +91 90333 11425.

Bolts & Machine Screws Supplier in Ahmedabad