Sleeve and Taper Nut
WhatsApp us the size, grade, finish and quantity. We reply within one working day (Mon to Sat, 10 am to 8 pm).
WhatsApp us Get a Quote +91 90333 11425 Download catalogue (PDF)JMIKS Fasteners supplies sleeve and taper nut anchors in mild steel and stainless steel. This anchor has a threaded stud, an expansion sleeve and an internally threaded taper nut, and it needs only a shallow hole.
Sleeve with an internally threaded taper nut, for the lowest anchoring depth.
When the nut on the stud is tightened, the taper nut at the other end is pulled into the sleeve.
The sleeve expands and grips the wall of the hole.
Use it where the concrete is thin or the hole cannot be deep, because it sets at a low anchoring depth.
Mild steel anchors suit dry, indoor fixings. Choose stainless steel for outdoor, damp or chemical areas, where mild steel would rust.
A wedge anchor grips with a clip near the end of the bolt and is used for heavy loads in solid concrete. A sleeve and taper nut anchor expands a sleeve with a taper nut and sets at a low depth, so it suits thin slabs and walls.
Size chart
The size chart for this anchor is not available online right now. Please contact us with the anchor type, diameter, length and quantity, and we will tell you the sizes we can supply.
Send the size, grade, finish and quantity on WhatsApp. We reply with the rate and stock position within one working day.
