JMIKS Fasteners supplies stud bolts and threaded rods: B7 and B8 stud bolts, SS stud bolts, half threaded studs and GI threaded rods, from M6 to M36 and ¼" to 1-1/4" BSW, in lengths up to 500 mm, to DIN and ASTM standards. MS and GI full threaded rods are available in ready stock in 1 m, 2 m and 3 m lengths, and SS 304 and SS 202 rods in 1 m and 2 m. Stainless steel full threaded studs to DIN 975 are also supplied in SS 316. We are a wholesale dealer and stockist of stud bolts and threaded rods in Nava Odhav, Ahmedabad.
| Product | Material and grade | Length | Typical use |
|---|---|---|---|
| B7 & B8 Stud Bolt | B7, B8, B8M, L7 | 20 to 500 mm | Flanges and valves, high temperature and pressure |
| SS Stud Bolt | SS 304, SS 316, SS 202 | 20 to 500 mm | Rust-free joints, food and water plants |
| GI Threaded Rod | 4.6, 8.8; zinc plated, HDG, self finish | 20 to 500 mm; full rods of 1, 2 and 3 m | Hangers, supports and anchoring |
| Half Threaded Stud | SS 304, SS 316, SS 202 | 6 to 250 mm | Tapped holes, casings and flanges |
A threaded rod is threaded along its full length and comes in long lengths that are cut to size on site. A stud bolt is cut to a fixed length, ready to fit with a nut on each end. A half threaded stud has a plain shank for extra strength in shear.
B7 studs are normally used with ASTM A194 grade 2H heavy hex nuts.
Yes. Threaded rods are supplied in full lengths of 1 m, 2 m or 3 m, or cut to the length you need.
Use a long nut (coupling nut) of the same size, and screw each rod halfway into it.
Send the size, grade, finish and quantity on WhatsApp. We reply with the rate and stock position within one working day.
