SS Stud Bolt
WhatsApp us the size, grade, finish and quantity. We reply within one working day (Mon to Sat, 10 am to 8 pm).
WhatsApp us Get a Quote +91 90333 11425 Download catalogue (PDF)JMIKS Fasteners supplies stainless steel stud bolts in SS 304, SS 316 and SS 202, from M6 to M36 and ¼” to 1-1/4″ BSW, in lengths from 20 mm to 500 mm, to DIN and ASTM standards.
Standard : DIN/ ASTM
Size : Metric : M6 To M36 / BSW : ¼” to 1-1/4”
Material Grade: SS202, SS304, SS316
Length : 20mm to 500mm
A stud bolt is a threaded rod without a head. It takes a nut on each end, or screws into a tapped hole at one end. Stainless steel studs resist rust and are used where joints are exposed to water, weather or chemicals. Fully threaded studs are covered by DIN 976, and threaded rods by DIN 975.
SS 304 has more nickel and resists rust better, so it is the standard choice for outdoor and wet areas. SS 316 adds molybdenum for coastal, marine and chemical sites, and is also available as half threaded studs and B8M studs. SS 202 costs less and suits indoor, dry use. Our SS 304 vs SS 316 vs SS 202 guide compares the grades.
A threaded rod comes in long lengths, such as 1 m, 2 m or 3 m, and is cut to size. A stud bolt is already cut to a fixed length, ready to fit.
Only slightly, after cold working. A slight pull from a magnet is normal for SS 304 and does not mean the material is wrong.
Send the size, grade, finish and quantity on WhatsApp. We reply with the rate and stock position within one working day.
