Flange Bolt
WhatsApp us the size, grade, finish and quantity. We reply within one working day (Mon to Sat, 10 am to 8 pm).
WhatsApp us Get a Quote +91 90333 11425 Download catalogue (PDF)JMIKS Fasteners supplies hex flange bolts in SS 304, SS 316 and SS 202, from M3 to M36 and ¼” to 1-1/4″ BSW, in lengths from 6 mm to 250 mm. The built-in flange under the head works like a washer and spreads the load.
Standard : DIN / IS / AISI
Size : Metric : M3 To M36 / BSW : ¼” to 1-1/4”
Material Grade: SS304 | SS316 | SS202
Length : 6mm to 250mm
A flange bolt has a hexagon head with a wide circular flange. The flange spreads the clamping force over a larger area, so a separate washer is often not needed. Serrated flanges also resist loosening from vibration. The common standards are DIN 6921 and ISO 4162.
Key dimensions of DIN 6921 hex flange bolts in common sizes, in mm. The head height includes the flange. ISO 4162 flange bolts have smaller heads, so check the standard on your drawing.
| Size | Thread pitch | Spanner size | Flange diameter | Head height |
|---|---|---|---|---|
| M5 | 0.8 | 8 | 11.8 | 5.4 |
| M6 | 1.0 | 10 | 14.2 | 6.6 |
| M8 | 1.25 | 13 | 18.0 | 8.1 |
| M10 | 1.5 | 15 | 22.3 | 9.2 |
| M12 | 1.75 | 16 | 26.6 | 11.5 |
| M16 | 2.0 | 21 | 35.0 | 14.4 |
Typical dimensions as per DIN 6921; refer to the standard for tolerances.
Usually not, because the flange acts as a built-in washer. Use a separate washer only on soft material or oversize holes. Pair flange bolts with our flange nuts for a vibration-resistant joint.
To DIN 6921, M6 takes a 10 mm spanner, M8 13 mm, M10 15 mm, M12 16 mm and M16 21 mm. From M10 upwards this is smaller than an ordinary hex bolt of the same size, so check the head before you choose a socket.
SS 304 suits most indoor and outdoor work. Choose SS 316 near the sea, in chemical plants and where strong cleaning agents are used. SS 202 is an economical choice for dry, indoor assemblies. See our SS 304 vs SS 316 vs SS 202 guide.
Send the size, grade, finish and quantity on WhatsApp. We reply with the rate and stock position within one working day.