Pan Phillips Screw
WhatsApp us the size, grade, finish and quantity. We reply within one working day (Mon to Sat, 10 am to 8 pm).
WhatsApp us Get a Quote +91 90333 11425 Download catalogue (PDF)JMIKS Fasteners supplies pan Phillips screws (cross-recessed pan head machine screws) in SS 304, SS 316 and SS 202, from M3 to M36 and ¼” to 1-1/4″ BSW, in lengths from 6 mm to 250 mm.
Standard : DIN / IS / AISI
Size : Metric : M3 To M36 / BSW : ¼” to 1-1/4”
Material Grade: SS304 | SS316 | SS202
Length : 6mm to 250mm
The pan head is slightly domed with a flat bearing face, so it sits on top of the surface and spreads the load. The common standards are DIN 7985 and ISO 7045.
Head diameter, head height and Phillips bit size of cross-recessed pan head screws to DIN 7985 and ISO 7045, in mm. In these sizes, the two standards differ only on the M3 and M5 heads.
| Size | Phillips bit | Head diameter DIN 7985 | Head diameter ISO 7045 | Head height DIN 7985 | Head height ISO 7045 |
|---|---|---|---|---|---|
| M3 | PH1 | 6.0 | 5.6 | 2.4 | 2.4 |
| M4 | PH2 | 8.0 | 8.0 | 3.1 | 3.1 |
| M5 | PH2 | 10.0 | 9.5 | 3.8 | 3.7 |
| M6 | PH3 | 12.0 | 12.0 | 4.6 | 4.6 |
| M8 | PH4 | 16.0 | 16.0 | 6.0 | 6.0 |
| M10 | PH4 | 20.0 | 20.0 | 7.5 | 7.5 |
Typical dimensions as per DIN 7985 and ISO 7045; refer to the standard for tolerances.
Use a pan head when the head can sit above the surface, and a CSK Phillips screw when it must be flush.
Use a PH1 bit for M3, PH2 for M4 and M5, PH3 for M6, and PH4 for M8 and M10. A bit that is too small slips in the recess and damages the head.
From under the head to the tip, so the head is not included. A CSK Phillips screw is different: its length includes the countersunk head.
Send the size, grade, finish and quantity on WhatsApp. We reply with the rate and stock position within one working day.
